Well, ok, this work was done last saturday. I've been working with my foll body cast, and forgot to update this blog on this project.
The chest pieces are bent thus far. Still have not decided if they need to be bent more.
The hardboard inside the piece helps a lot when bending the edges.
As well as the rubber hammer. Thanks Skjoldhammar. I hammered these pieces on the floor against a piece of wood. I hit the piece from the inside, so to keep any dents on the hardboard.
This is the side view. I still think that these need more curving. But that is for another day.
The chest pieces are bent thus far. Still have not decided if they need to be bent more.
The hardboard inside the piece helps a lot when bending the edges.
As well as the rubber hammer. Thanks Skjoldhammar. I hammered these pieces on the floor against a piece of wood. I hit the piece from the inside, so to keep any dents on the hardboard.
This is the side view. I still think that these need more curving. But that is for another day.
Ei kommentteja:
Lähetä kommentti